Delhaize Bag-in-Box Line Raises Output by 27%
Delhaize Bag-in-Box Line Raises Output by 27%
Packaging design and machine performance are often purchased as separate considerations. A recent wine packaging project in Belgium illustrates what can happen when they are developed together. At Delhaize’s Zellik operation, a redesigned bag-in-box format and a dedicated case-forming machine increased the reported line rate from 1,500 to 1,900 packs per hour.
That is an increase of 400 packs per hour, or approximately 27% relative to the original rate. The result was reported by PAPnews on November 12, 2026, and covered again by Industry EMEA on November 16. These are project-specific reported results, not a guarantee for other packaging lines.
Packaging and Machinery Designed Together
DS Smith and Delhaize worked on the corrugated packaging and the equipment used to form it as a coordinated solution. Industry EMEA describes a custom mandrel case-forming machine adapted to the bag-in-box format and the site’s production requirements. The reported line covers erecting, filling, closing and palletising.
In a bag-in-box application, the outer case supports a flexible bag containing the product. Its geometry has to suit the forming equipment as well as filling, closure, handling and distribution. If dimensions or folds vary, a defect introduced during forming can cause problems at a later station. Conversely, a faster forming machine does not automatically improve output if another operation is the constraint.
What the Case Reports
PAPnews reports improved stability and fewer interruptions, as well as a reduction in the number of operators required. Industry EMEA reports that operators were reassigned to reinforce quality control. The available reports do not provide complete before-and-after downtime logs, test durations, machine pricing or an independently audited productivity study.
| Reported measure | Before | After | Interpretation |
|---|---|---|---|
| Line output | 1,500 packs/hour | 1,900 packs/hour | 400 additional packs/hour; approximately 26.7% increase |
| Storage capacity | 5,000 packs | 6,000 packs | Reported increase of 1,000 packs; measurement descriptions differ between sources |
| Equipment | Not specified in the reports | Dedicated forming machine | Compare the full process, not just one machine’s rated speed |
The storage figure needs careful interpretation: PAPnews describes capacity per storage location, while Industry EMEA describes capacity in each warehouse. The reports do not explain that difference, so the figures should not be used to calculate floor-space savings without further confirmation.
Why Case Squareness Matters
A correctly formed case needs to move predictably through the next operations. Case squareness, consistent folds and stable dimensions can affect how reliably a pack enters filling and closing equipment. The Delhaize coverage links the redesigned machine and packaging to improved squareness and line reliability, but does not isolate the contribution of each individual change.
Mandrel forming generally folds a blank around a form that helps establish its shape. The specific tooling, adhesive and control arrangement depend on the machine and box design. A converter considering a similar approach should test the actual blank, board grade and adhesive rather than assume a different case will behave the same way.
Check Upstream Quality Too
Forming performance starts with the incoming blank. Cutting accuracy, crease quality, board moisture and stacking condition all influence how reliably equipment can pick, fold and position material. A sample that looks acceptable on a bench may behave differently during sustained automatic feeding, so trial conditions should reflect production handling.
For short runs or design development, digital cutting can help teams assess the geometry of proposed samples before choosing production tooling. It does not replace validation on the final forming line or demonstrate that a particular cutter is integrated with the Delhaize equipment.
How to Evaluate a Packaging Line Upgrade
Measure Accepted Output
Before changing a line, establish a baseline for accepted packs per hour, planned and unplanned downtime, rejects and labor at each station. Define the reporting period and product mix. Compare the same measures after the change over representative shifts, including startup and normal interruptions. A headline speed alone can hide losses elsewhere in the process.
Separate machine cycles from finished, accepted packs. For example, a case former may cycle at a certain rate while downstream filling or palletising determines the actual rate of completed units. The reported 1,900 packs per hour at Delhaize is a result for that project, not a specification for every mandrel former.
Agree on a Factory Acceptance Test
Use the customer’s intended blanks and document the dimensions, board specification and adhesive. Agree on checks for squareness, bond quality and damage, together with the number of samples and duration. Test common formats and the most demanding format that the buyer expects to run. If several suppliers are involved, identify who is responsible for the interfaces between processes.
Ask for a full quotation covering tooling, installation, training, spare parts and maintenance access. Payback also depends on material cost, available production time and actual demand. No project cost or return-on-investment period was published in the cited reports.
What This Means for Converters
The lesson is not that every packaging plant needs a custom machine. It is that the box, material and equipment should be evaluated as one system. A packaging designer can involve operations early, while an equipment buyer can request samples and operating data from the converter supplying the blanks.
For a repeat high-volume product, a dedicated format may justify investment in tailored tooling. For mixed short-run orders, setup time and flexibility may carry more weight. In either case, testing the actual package through forming, filling, closure and distribution provides more useful evidence than comparing specifications in isolation.
FAQ
How much did the Delhaize line increase output?
The reported rate rose from 1,500 to 1,900 packs per hour, an increase of 400 packs or approximately 27%.
Was the improvement caused only by the machine?
The reports describe both packaging and equipment changes. They do not quantify the separate contribution of each change.
Can another line expect the same result?
No. The reported outcome is specific to the Delhaize installation. Other sites need their own baseline and acceptance tests.
Related Kylin Equipment
For packaging sample and short-run cutting, explore Kylin’s digital die cutting machine. This is a separate product, not the Delhaize forming system; confirm material suitability and workflow requirements with Kylin. Discuss an application via WhatsApp: +86-13809820550.
Leave a Reply